The Bang & Olufsen Beosystem 6000, Beosystem 8000 and Beocenter 5000 and 700x series are likely to have issues with the display LED segments not lighting up. This includes Beocenter 5000, 7000, 7002, 7007, 7700 but also Beomaster 6000 (Type 22xx), Beomaster 8000, Beocord 6000, Beocord 6002, Beocord 8002, Beocord 8004 and Beocord 9000.

Compatibility

This kit contains a set of self designed, replacement display PCBs with suitable LEDs already installed. The display modules fit the Beocenter 5000, 7000, 7002, 7007, 7700 without modifications. The display can be easily installed in the existing plastic housing. The part is naturally NOT an original spare part but is 100% compatible with the original.

Since the LEDs are brighter than the originals, it is necessary to add a layer of adhesive film to dim the LEDs (suitable film is included in your order). With the film, the brightness closely resembles the original brightness. No other modifications are needed to install this module, as the LEDs already operate at well below their rated max current.

• Beocenter 5000, 700x: Part replaces original B&O spare part no 8330028/8330011 (21DP1) counter, 8330029/8330013 (21DP2) source.
• Beocenter 7700: Part replaces original B&O spare part no 8330011 (41DP1) counter, 8330013 (41DP2) source.

Note the PPM display part no 8330067 (41DP3) is NOT included in this kit

Parts included

• Frequency/clock/counter display module (DP1)
• Source selection display module (DP2)
• 2.54mm pin headers of correct length
• Adhesive film for dimming the display brightness

Installation

Replacing the display modules is relatively straightforward, although requires removing the original display modules carefully, disassembling them and then replacing the display PCB. Please do NOT buy, if you are not confident in replacing this part yourself! A detailed installation guide is provided with each display purchase.

Shipping within 3 days, any day of the week.