The Bang & Olufsen Beosystem 6000 and Beosystem 8000 products are likely to have issues with the display LED segments not lighting up. Beomaster 6000, Beomaster 8000, Beocord 6000 series, Beocord 8000 series and Beocord 9000 are prone to having these issues. Products such as Beocenter 5000,7000,7002,7007,7700 are also likely to have display issues.

Compatibility

The kit contains a set of self designed, replacement display PCBs with suitable LEDs already installed. The display modules fit the Beocord 6000, 6002, 8000, 8002, 8004 and Beocord 9000 without modifications. The display can be easily installed in the existing plastic housing. The part is naturally NOT an original spare part but is 100% compatible with the original.

Since the LEDs are brighter than the originals, it is suggested to add a layer of film to dim the LEDs (suitable film is included in your order). With the film, the brightness closely resembles the original brightness. No other modifications are needed to install this module, as the LEDs already operate at well below their rated max current.

Part replaces original B&O spare part no 8330028 (1DP1), 8330014 (1DP2) or equivalent spares.

Parts included in the kit

• Counter display module (DP1)
• Peak power meter PPM (DP2)
• 2.54mm pin headers of correct length
• Film for dimming the display brightness
• Optional: The PPM bulb often breaks during removal of the PPM display. It is therefore highly encouraged to change it as well.

Installation

Replacing the display modules is relatively straightforward, although requires removing the original display modules carefully, disassembling them and then replacing the display PCB. Please do NOT buy, if you are not confident in replacing this part yourself! A detailed installation guide is provided with each display purchase.

Similar display modules are available for Beomaster 6000, Beomaster 8000. See my other listings for combined purchase & shipping

Shipping within 3 days, any day of the week.