This product was designed by 8086 Consultancy.
By buying this product you support original hardware creators.
USB Type-A to dual micro USB/Barrel jack
The adaptor allows the Raspberry Pi 4 to be used with a Pi Micro USB power supply (or DC barrel jack) whilst allowing access to the OTG USB.
USB Type-A (data and power) <> USB Data (Micro USB) and Power (Micro USB/Barrel jack).
| USB Type A | Micro USB (PWR) | Micro USB (USB) | Barrel Jack |
|---|---|---|---|
| 5V | 5V | 5V (tip) | |
| D- | D- | ||
| D+ | D+ | ||
| GND | GND | GND | GND |
The barrel jack accepts 5.5 mm jacks (2.1/2.5 pin) providing 5V.
To use the adaptor with the Raspberry Pi 4 you need.
- A short USB-C to USB-A cable between Pi4 and the adaptor board.
- Micro USB cable to access USB OTG Data.
- Power via either Micro USB Power Supply or Barrel jack (5v 2.4 Amp or higher PSU).
(Raspberry Pi/USB Cables/PSU/etc. not included)
Short cables are advised as the voltage drop over longer cables may cause problems.
Using a Cluster HAT node image (p1/p2/p3/p4) you can plug the USB data into a computer (Raspberry Pi, Win10, etc.) and access the system via either USB Gadget Ethernet or Serial Console.
We also have a USB Type-C version of this adaptor available.
Links to code and documentation
No additional links provided for this product.
Product HS Code: 847180
Shipping policy
Please ensure your address is full and correct before placing an order and be aware I'm unable to use some shipping methods to PO boxes.
Deliveries to the USA are sent using RoyalMail PDDP (Postal Delivery Duties Paid).
The seller
Maker of things mostly for the Raspberry Pi and Arduino world.