Please note that this store is currently in vacation mode. All orders received since April 29, 2026 will be processed after May 22, 2026, and shipping will resume thereafter. Thank you for your understanding.
Main product image for M2Q - Control your Chamsys console via MIDI
Product image 1 for M2Q - Control your Chamsys console via MIDI
Product image 2 for M2Q - Control your Chamsys console via MIDI
Product image 3 for M2Q - Control your Chamsys console via MIDI
Product image 4 for M2Q - Control your Chamsys console via MIDI
Product image 5 for M2Q - Control your Chamsys console via MIDI
Product image 6 for M2Q - Control your Chamsys console via MIDI
Product image 7 for M2Q - Control your Chamsys console via MIDI
Product image 8 for M2Q - Control your Chamsys console via MIDI
A powerful MIDI to Chamsys Remote converter designed to trigger playbacks, cue stacks and synchronize tap-to tempo using MIDI messages
Audio
MIDI
Tools

M2Q - Control your Chamsys console via MIDI

Sold by Lorenzo

$409.57

No tax for United States [change]
Chose between components kit, pre-soldered PCB, or a full assembled kit.
Stock available: 1
Check
Original Design
This product was designed by Lorenzo. By buying this product you support original hardware creators.
SHARE

M2Q is A powerful MIDI to Chamsys Remote converter designed to trigger playbacks, cue stacks and synchronize tap-to tempo using MIDI Messages

It has been designed by me, based on an idea of Manuel Rodriguez. Manuel is a professional light designer who used this little box in his amazing shows, touring all over the world!

How It Works

  • M2Q has a USB port, which acts as a USB-MIDI Interface, just connect it to any PC or MAC and it will appear as a MIDI device.
  • There is also an Ethernet port, which is connectected to the Chamsys console (or software)
  • M2Q Listens to MIDI Note, MIDI ControlChange and MIDI Clock messages being sent to the MIDI interface.
  • When one of these messages it's received, it gets processed and a Chamsys Remote message is sent out to the console.
  • Works with both Chamsys consoles and MagicQ PC, software needs to be unlocked and only the first 10 playbacks are available in the PC version.
  • Just plug your midi interface, select it and start sending MIDI messages!

Main Features

Triggering Playbacks

Triggering Playbacks is used for remotely activate and switch cues inside a playback of MagicQ. This can be useful for real-time cue triggering without having to use Timecode.

Changing Playback Level

Changing Playback Level is used for remotely change level of a playback of MagicQ like moving the console faders Up/Down. This can be useful for real-time fades without having to use Timecode. Since the behaviour of the playback level can be changed in MagicQ, it is possible to use it for remotely changing Intensity, speed, size, etc.

Triggering The Stack Store

Triggering The Stack Store is used for remotely activate/deactivate cue stacks inside the Stack Store of MagicQ. This can be useful for real-time cue flashing or activating chases having to use Timecode.

Tap2Tempo Trigger

Tap2Tempo Trigger is used to synchronize a MIDI clock signal to the internal console global tempo (BPM) by remotely tap to the GO button of MagicQ. This can be useful for synchronizing Chamsys effects to MIDI Clock.

Click Here for more information about M2Q features

Ordering Options

Please Make sure you choose the right option for you:

Only PCB Components Kit

Only PCB Components Kit

This kit includes all the components necessary to assemble your M2Q Board yourself:

  • PCB
  • Main processor flashed with the latest software version
  • SD card flashed with the webpage code
  • 2.54mm Header Male and Female Strip
  • Ethernet adaptor
  • LEDs and resistors
  • How to solder instructions

Please note:

  • You will have to solder all the components yourself.
  • The enclosure is NOT included, allowing you to mount the the board in your rack gear.
  • You need a USB micro cable (phone, etc,) in order to connect to your PC.

Only PCB soldered

Only PCB soldered Only PCB soldered

With this option you will receive the board fully assembled by me, without the need of soldering it.

Please note:

  • the enclosure is NOT included, allowing you to mount the the board in your rack gear.
  • You need a USB micro cable (phone, etc,) in order to connect to your PC.

PCB and Enclosure Components Kit

Only PCB Components Kit PCB and Enclosure Components Kit

This kit includes all the components necessary to assemble your M2Q Board and enclosure yourself:

  • PCB
  • Main processor flashed with the latest software version
  • SD card flashed with the webpage code
  • 2.54mm Header Male and Female Strip
  • Ethernet adaptor
  • LEDs and resistors

  • How to solder instructions

  • Black anodized aluminium enclosure

  • Laser cut acrylic side panels

  • Micro USB to USB A adaptor

  • How to assemble instructions

Please note:

  • you will have to solder and assemble all the components yourself.
  • You need a USB type A cable (printer etc.) in order to connect to your PC

Fully Assembled ready to go M2Q

Fully Assembled ready to go M2Q

With this option you will receive M2Q fully assembled and ready to go!

Please note: you need a USB type A cable (printer etc.) in order to connect to your PC

Living outside Europe/US? Send me a message and we can arrange shipping!

Links to code and documentation

Documentation (lorenzofattori.github.io)

Shipping policy

I am willing to ship worldwide, but shipping costs vary by country.

If your country is not listed, feel free to contact me, I will check the price add it to the list.

Here are some extras that might be useful for your project!
Nitro Hat - controller for Alesis Nitro

The seller

Lorenzo

Lorenzo logo

Den Haag, Netherlands
22 orders since Jan 11, 2026
Welcome to my store, where you can find my upgrades for your e-drums!