Main product image for LCD for TRS-80 PC-1 / Sharp PC-1211
Product image 1 for LCD for TRS-80 PC-1 / Sharp PC-1211
LCD replacement for TRS-80 PC-1 and Sharp PC-1211 pocket computers
Displays

What is it?

This is a pin-for-pin compatible nearly exact replacement for the LCD module in the Radio Shack TRS-80 PC-1 (catalog number 26-3501) or Sharp PC-1211 pocket computer released in 1980.

Why did you make it?

Many PC-1 and PC-1211 pocket computers suffer from LCD degradation to the point where they are no longer useful. Apparently the seal around the LCD was of poor quality, and over the years moisture gets in and ruins the liquid crystal. The result is a display ranging from a few splotches to complete failure.

LCD showing complete degradation

I decided that it was important to bring all these dead PC-1 and PC-1211 computers back to life by reverse-engineering the LCD and remanufacturing them.

What makes it special?

These LCDs were custom manufactured by Sharp for the PC-1211. Radio Shack had a rebranding agreement with Sharp, and named the computer the TRS-80 PC-1. Replacement LCDs were never available, and finding a working LCD is problematic, given the systematic failure of the seal.

I tried as much as possible to make the fonts and positions used for the indicators as identical to the original as possible. The color of the glass is different -- green rather than yellowish-brown.

Original LCD Replacement LCD

Instructions for replacement

I've made a video showing how to replace one of these LCDs. There are a few crucial things you have to be aware of:

  • Be sure to remove the plastic protective sheet on the top before installation.
  • After removing the bezel+LCD assembly from the original computer, you'll need to soak the assembly in acetone for 2 to 3 hours to get the old LCD unstuck from the bezel. Alternatively, I've heard about successes by putting the assembly on a hotplate set to 100C for about three minutes -- be very careful that you don't burn yourself!
  • Wipe the contacts on the new LCD and clean the elastomeric strips from your existing computer with isopropyl alcohol -- preferably the 99.9% purity kind.
  • Because the voltage thresholds differ between old and new LCDs, you will need to increase the display contrast resistance to its maximum. Unfortunately, the manufacturers glued the wiper down so it can't be moved without breaking it. That's ok -- go ahead and break the wiper off! After all, you won't be needing it anymore. The video shows how.
  • Replacing the LCD will not guarantee a working computer! There could be other faults.
  • Getting the positioning right is crucial. The video shows how to do this easily.

Links to code and documentation

No additional links provided for this product.

Product HS Code: 85241100

Shipping policy

No information available.
This product does not ship to United States.

LCD for TRS-80 PC-1 / Sharp PC-1211

Sold by The Half-Baked Maker's LCDs

$20.00

No tax for United States [change]
Stock available: 1000
Check
Ships from United States
This product ships from your country, so you don't have to worry about import fees or tariffs.
Original Design
This product was designed by The Half-Baked Maker's LCDs. By buying this product you support original hardware creators.

The seller

The Half-Baked Maker's LCDs

The Half-Baked Maker's LCDs logo

Morgan Hill, California, United States
1 order since Nov 19, 2026
Selling useful stuff!