⚠️ Important Compatibility Warning
This module is for the XY interface only. It is NOT compatible with CNS interface units. For CNS interface units, please check our other products. (https://lectronz.com/products/climacontrol-mhi-air-to-air)

ClimateControl Module for Mitsubishi Heavy Industries HVAC

Smart control. Better comfort. Fully Plug & Play.

Increase efficiency and comfort of your Mitsubishi Heavy Industries HVAC system and integrate it into your existing home automation setup like FHEM, Tasmota and Home Assistant or any other system that can work with HTTP GET or MQTT.

ClimateControl Module has been professionally developed, tested and proven with hundreds of HVAC setups already and does not require the user to do any soldering or tinkering with cables. It is fully Plug-and-Play!

Why Choose ClimateControl?

• Plug & Play Installation: No cables to modify, no soldering required. Avoid damage risks to your HVAC system.
• Stable Room Temperature: The wireless temperature sensor prevents false readings near the unit, reducing frequent on/off cycles and saving energy.
• Smart Home Integration: Supports Home Assistant, Tasmota, FHEM, Loxone, OpenHAB, and more via MQTT or HTTP GET.
• Protect Your Equipment: Safely control your HVAC with a professionally designed module.

Features & Functionality

Wireless Temperature Sensor:

• Many HVAC systems suffer from constant temperature fluctuations because the sensor inside the indoor unit heats up before the room heats up, causing the unit to shut down prematurely.
• This is especially noticeable when the room is cold in the morning and you want to heat it up. The sensor may incorrectly think the temperature is reached, even though the room remains 3 degrees Celsius below the setpoint.
• The same happens at low fan speeds, where warm air remains close to the unit, resulting in incorrect temperature readings and frequent on/off cycles.
• The ClimateControl’s wireless sensor can be placed anywhere in the room for accurate readings.
• This significantly improves temperature stability, adds comfort, reduces equipment wear, and saves energy.

Smart M-Air & RC-E5/RC-EX3A Thermostats:

This module can run in both main and sub mode in parallel to a wall thermostat. Continue using your preferred thermostat while enjoying ClimateControl’s full features.

Temperature Limit:

Prevents energy waste or discomfort from extreme temperature settings. You can define minimum and maximum limits (for both heating and cooling!), overriding changes from the infrared remote.

Installation:

• Simple plug-and-play connection to your indoor unit.
• One module is required per indoor unit.
• Works seamlessly integrated into your smart home system.

Home Automation Integration

Home Assistant: Fully supports MQTT auto-discovery for seamless integration.

Other Supported Systems:

• Loxone
• HACS
• Tasmota
• OpenHAB
• FHEM
• Any system supporting MQTT or HTTP GET

Supported Models & Installation

ClimateControl works with a wide range of Mitsubishi Heavy Industries indoor units equipped with compatible communication ports (ducted, wall-mount, floor-mount and more). Check your indoor unit’s manual to confirm compatibility or check our documentation in the link below.

Orders are usually shipped once a week. Delivery depends on location.