# Nitro Stick - Sticks holder for the Alesis Nitro

A sticks holder for the Alesis Nitro Max drumkit

- **Seller:** [Drumic](https://www.lectronz.com/stores/lorenzo), Den Haag, Netherlands
- **Price:** €5.00 (EUR, before shipping and taxes)
- **Availability:** In stock
- **Categories:** 3D printing, Audio
- **Product page:** https://www.lectronz.com/products/nitro-stick-sticks-holder-for-the-alesis-nitro

## Images

![Nitro Stick - Sticks holder for the Alesis Nitro](https://lectronz-images.b-cdn.net/lectronz/active_storage/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NDU1NzQsInB1ciI6ImJsb2JfaWQifX0=--c2c6a2d4579e749d0e2945daa57aad08b9a1889c/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJqcGciLCJyZXNpemVfdG9fbGltaXQiOls5NjAsNjQwXSwic2F2ZXIiOnsic3RyaXAiOnRydWV9fSwicHVyIjoidmFyaWF0aW9uIn19--970c165836a83091725a1a0fd4f37ce9408da1bf/IMG_20260330_164632.jpg)
![Nitro Stick - Sticks holder for the Alesis Nitro](https://lectronz-images.b-cdn.net/lectronz/active_storage/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NDU1NTMsInB1ciI6ImJsb2JfaWQifX0=--0dba3d59737f3a76c2996d96f43eb32e50d189b6/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJqcGciLCJyZXNpemVfdG9fbGltaXQiOls5NjAsNjQwXSwic2F2ZXIiOnsic3RyaXAiOnRydWV9fSwicHVyIjoidmFyaWF0aW9uIn19--970c165836a83091725a1a0fd4f37ce9408da1bf/IMG_20260330_165651.jpg)
![Nitro Stick - Sticks holder for the Alesis Nitro](https://lectronz-images.b-cdn.net/lectronz/active_storage/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NDU1NjYsInB1ciI6ImJsb2JfaWQifX0=--9ec09df28fdbea0029f765af5febee7ff133174b/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJqcGciLCJyZXNpemVfdG9fbGltaXQiOls5NjAsNjQwXSwic2F2ZXIiOnsic3RyaXAiOnRydWV9fSwicHVyIjoidmFyaWF0aW9uIn19--970c165836a83091725a1a0fd4f37ce9408da1bf/IMG_20260330_164618_Bokeh.jpg)

## Description

# Hey!
I'm Lorenzo—a drummer, electronics engineer, and the creator of the Nitro Hat. If you've seen my other product, you are playing drums on an Alesis Drumkit. So where do I put your sticks?

Every time I finished a session, my sticks would end up on the floor, balanced awkwardly on the snare, or just... gone. And my drum key? Don't even ask. I wanted something simple—a dedicated spot for my sticks right on the kit itself, always within reach, always tidy.

# The Nitro Stick
It's a small 3D-printed clip that snaps directly onto one of the legs of the Alesis Nitro Max frame. 
* Two holes hold your sticks securely, tip-down. 
* A third, smaller hole holds your drum key. 

That's it. No screws, no tools, no velcro—it just clips on.

It takes five seconds to install and makes your setup instantly cleaner and more organized.
The Nitro Stick works with any drumkit with 35mm leg diameter.

# Any Questions?
Feel free to contact me using the Message Seller button on the right.

# Made in EU!
This product is designed and printed in The Netherlands, using 100% recycled plastic from a Dutch supplier.
r/#BuyFromEU

## Shipping policy

Shipping to Europe — VAT is included in the price. No surprises at the door.
Shipping to the United States — Pre-paid tariffs are included at checkout. Nothing to pay on delivery.
Shipping to the rest of the world — Local customs duties may apply upon delivery.

I am willing to ship worldwide, but shipping costs vary by country.
If your country is not listed, feel free to contact me, I will check the price add it to the list.