# LCD for TRS-80 PC-3 / Sharp PC-125x

LCD replacement for TRS-80 PC-3 and Sharp PC-1250/-1251/-1255 pocket computers

- **Seller:** [The Half-Baked Maker's LCDs](https://www.lectronz.com/stores/halfbakedmaker-lcd), Morgan Hill, California, United States
- **Price:** €18.20 (EUR, before shipping and taxes)
- **Availability:** In stock
- **Categories:** Displays
- **Country of origin:** United States
- **HS code:** 85241100
- **Product page:** https://www.lectronz.com/products/lcd-for-trs-80-pc-3-sharp-pc-125x

## Images

![LCD for TRS-80 PC-3 / Sharp PC-125x](https://lectronz-images.b-cdn.net/lectronz/active_storage/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6Nzc3OTAsInB1ciI6ImJsb2JfaWQifX0=--d3e9ee72d336e54395defe548100b1103398f441/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJqcGciLCJyZXNpemVfdG9fbGltaXQiOls5NjAsNjQwXSwic2F2ZXIiOnsic3RyaXAiOnRydWV9fSwicHVyIjoidmFyaWF0aW9uIn19--970c165836a83091725a1a0fd4f37ce9408da1bf/pc-125x.jpg)

## Description

### What is it?

This is a pin-for-pin compatible nearly exact replacement for the LCD module in the Radio Shack TRS-80 PC-3 or [Sharp PC-1250](https://www.old-computers.com/museum/computer.asp?st=1&c=1091)/[-1251](https://en.wikipedia.org/wiki/Sharp_PC-1251)/[-1255](http://pocket.free.fr/html/sharp/pc-1255_e.html) pocket computer released in 1983.

### Why did you make it?

Many PC-3 and PC-125x pocket computers suffer from LCD degradation to the point where they are no longer useful. Apparently the seal around the LCD was of poor quality, and over the years moisture gets in and ruins the liquid crystal. The result is a display ranging from a few splotches to complete failure.

![LCD showing degradation](https://i.imgur.com/yUcGKUl.jpg "Degraded PC-3 LCD")

I decided that it was important to bring all these dead PC-3 and PC-125x computers back to life by reverse-engineering the LCD and remanufacturing them.

### What makes it special?

These LCDs were custom manufactured by Sharp for the PC-125x. Radio Shack had a rebranding agreement with Sharp, and named the computer the TRS-80 PC-3. Replacement LCDs were never available, and finding a working LCD is problematic, given the systematic failure of the seal.

I tried as much as possible to make the fonts and positions used for the indicators as identical to the original as possible.

![Original LCD](https://i.imgur.com/5d5sNus.jpg "Original LCD")
![Replacement LCD](https://i.imgur.com/rhED2H9.jpg "Replacement LCD")

### Instructions for replacement


I've made [a video](https://youtu.be/Oa630UVaWp0) showing how to replace one of these LCDs. There are a few crucial things you have to be aware of:

- Be sure to remove the plastic protective sheet on the top before installation.
- After removing the bezel+LCD assembly from the original computer, you'll need to soak the assembly in acetone for 2 to 3 hours to get the old LCD unstuck from the bezel. Alternatively, I've heard about successes by putting the assembly on a hotplate set to 100C for about three minutes -- be very careful that you don't burn yourself!
- Wipe the contacts on the new LCD and clean the elastomeric strips from your existing computer with isopropyl alcohol -- preferably the 99.9% purity kind.
- Replacing the LCD will not guarantee a working computer! There could be other faults.
- Getting the orientation right is crucial. The video shows how to do this easily.
