# Isolated I2C Modbus RS485 Module (IS4310-ISO485M1)

Isolated Modbus RTU slave for any microcontroller. Read and write 500 Holding Registers over I2C, no Modbus stack needed.

- **Seller:** [INACKS](https://www.lectronz.com/stores/inacks), Terrassa, Barcelona, Spain
- **Price:** €4.80 (EUR, before shipping and taxes)
- **Availability:** Coming soon
- **Categories:** RS232/RS485, I2C, Home automation
- **Country of origin:** Spain
- **Product page:** https://www.lectronz.com/products/isolated-i2c-modbus-rs485-module-is4310-iso485m1

## Links

- [Documentation](https://inacks.com/wp-content/uploads/IS4310-Datasheet-I2C-Modbus-RTU-Slave-ISDOC125.pdf)
- [Code](https://github.com/inacks)
- [Schematics](https://github.com/inacks/ISXMPL4310ex11/blob/main/IS4310-ISO485M6%20Schematic.pdf)

## Images

![Isolated I2C Modbus RS485 Module (IS4310-ISO485M1)](https://lectronz-images.b-cdn.net/lectronz/active_storage/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NzU4NTYsInB1ciI6ImJsb2JfaWQifX0=--4bfd920a700402eeecbc89cb2afe27d1b2d02626/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJqcGciLCJyZXNpemVfdG9fbGltaXQiOls5NjAsNjQwXSwic2F2ZXIiOnsic3RyaXAiOnRydWV9fSwicHVyIjoidmFyaWF0aW9uIn19--970c165836a83091725a1a0fd4f37ce9408da1bf/IS4310-ISO485M1%20(1).jpg)
![Isolated I2C Modbus RS485 Module (IS4310-ISO485M1)](https://lectronz-images.b-cdn.net/lectronz/active_storage/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NzU4NjAsInB1ciI6ImJsb2JfaWQifX0=--12bc8d88479f5c949858bc01aacbc31f3fb73451/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJqcGciLCJyZXNpemVfdG9fbGltaXQiOls5NjAsNjQwXSwic2F2ZXIiOnsic3RyaXAiOnRydWV9fSwicHVyIjoidmFyaWF0aW9uIn19--970c165836a83091725a1a0fd4f37ce9408da1bf/IS4310-ISO485M1%20(2).jpg)
![Isolated I2C Modbus RS485 Module (IS4310-ISO485M1)](https://lectronz-images.b-cdn.net/lectronz/active_storage/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NzU4NjQsInB1ciI6ImJsb2JfaWQifX0=--5c779d24b52c546b06d7fb7cd34ad81cf81999ca/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJqcGciLCJyZXNpemVfdG9fbGltaXQiOls5NjAsNjQwXSwic2F2ZXIiOnsic3RyaXAiOnRydWV9fSwicHVyIjoidmFyaWF0aW9uIn19--970c165836a83091725a1a0fd4f37ce9408da1bf/IS4310-ISO485M1%20(3).jpg)

## Description

[**IS4310 Datasheet (PDF)**](https://inacks.com/wp-content/uploads/IS4310-Datasheet-I2C-Modbus-RTU-Slave-ISDOC125.pdf)

---

The **IS4310-ISO485M1** adds an **isolated Modbus RTU slave port** to your Arduino, Raspberry Pi, STM32, FPGA or any other microcontroller. Your firmware talks to the module over I2C, and the on-board **IS4310** chip handles the whole Modbus RTU protocol on the RS485 side.

Data exchange is simple: values you write to the 500 Holding Registers over I2C can be read by the Modbus master (PLC or PC), and values the master writes can be read back over I2C.

The RS485 bus is **galvanically isolated**, so the module copes well with long cable runs, electrical noise and ground potential differences between devices.

## Specs

- Modbus RTU slave over isolated RS485
- Function codes: 0x03, 0x06, 0x10
- 2 x RJ45 connectors for daisy-chaining
- I2C address 0x11 (fixed), 100 kHz / 400 kHz / 1 MHz
- 3.3 V I2C logic, 5 V tolerant
- Castellated holes for direct soldering onto your PCB
- Factory settings: Slave ID 1, 19200 bps, even parity, 1 stop bit

## Shipping policy

We ship all products from Barcelona via UPS within 1–2 business days. A tracking number is provided. Transit time is typically less than one week worldwide (excluding handling time).
